Tiny Audio C11 +
Only connect to 12 volt system
1. If black screen?
Check that there is power where it is connected and that all wires are connected to the adapter.
2. No sound in car radio (FM transmitter)?
Check in menu under Fm send that it is turned on!
Also check in menu Fm frequency equals adapter as on car radio
The frequency will appear in the top right corner of the adapter
3. No audio in car radio (AUX)?
Check that in menu that Fm send is turned off.
Also check that the car radio is set to AUX. And that the Aux cabel is connected to the adapter.
4. Poor coverage?
Check that the antenna is properly installed and grounding is correct in advance to the antenna supplied with the product. Someone has copper tape on the antenna amplifier and this one comes into the paint on the window post. Where there is no copper tape, antenna amplifier must be taped on the metal / A pole.
Then try a factory setting under menu
5. Choose between radio channel and artist / melody
Press and hold 1 / E to choose from
6. My C11 turns off / locks after the car has started.
We have seen this on a few car models, we recommend using another power source a cigarette ignition outlet as this car has a delay on this which causes the C11 to lock. A solution can then be to connect this fuse holder between red and yellow cable to prevent C11 from locking at ignition start.
